Emtec MOVIE CUBE, Руководство пользователя

Страница: 19 / 39

1.2.4 Linux
9
It can be available on Linux 2.4 higher.
[Automatic Mount]
After booting, do log-in.
Connect EMTEC MOVIE CUBE -> Power On EMTEC MOVIE CUBE -> Check the detection with [fdisk] -> make Mount
Pointer (ex. mediatest) at Folder Mount(/mnt) -> Edit [/etc/fstab] -> add the following;
/dev/sda /mnt/mediatest vfat noauto, user 0 0 (in case of FAT32 HDD)
/dev/sda /mnt/mediatest ntfs noauto, user 0 0 (in case of NTFS HDD)
Do Log-in again.
9
above example “sda” is assumed that the EMTEC MOVIE CUBE will be detected as “sda” on your system. If not, you have to
write the drive name which is detected as “USB Mass Storage”, not “sda”
[Manual Mount]
Connect EMTEC MOVIE CUBE -> Power On EMTEC MOVIE CUBE -> Check the detection with [fdisk] -> make Mount
Pointer (ex. mediatest) at Folder Mount(/mnt) -> Edit [/etc/fstab] -> add the following;
mount –t vfat /dev/sda /mnt/mediatest (in case of FAT32 HDD)
mount –t ntfs /dev/sda /mnt/mediatest (in case of FAT32 HDD)
9
above example “sda” is assumed that the EMTEC MOVIE CUBE will be detected as “sda” on your system. If not, you have to
write the drive name which is detected as “USB Mass Storage”, not “sda”
[How to stop using]
Do [unmount] at Device Control.
1.2.5 Mac
9 It can be available on Mac 9.0 higher.
No need to install the installation driver at Mac OS 9.x version and the EMTEC MOVIE CUBE will be detected
automatically. If the EMTEC MOVIE CUBE is detected correctly, an icon is appeared at a monitor.
When removing EMTEC MOVIE CUBE safely, drag the icon to a trash and unplug EMTEC MOVIE CUBE.
18