10
It means all set, then you can run you digital map
program.
But do remember to change the COM port
setting of GPS source of your program to COM 8.
After that, your digital map can receive the GPS signal
from our BTGPS.
Even though, you may use another kind of machine,
but the basic configuration steps are almost all the
same. You must
1.
Pair our BTGPS.
2.
Make a serial port connection.
3.
Open the right COM port for your application
Содержание CRUX II/BTGPS
Страница 1: ...0 CRUX II BTGPS USER GUIDE Model D1598 ...
