- All Signals connected to the METER in the Matrix will be shown in the
Oscilloscope and you can now feedback through to the iVCS3.
- Swipe (right to left) on Preset, Presets Bank or Samples Manager (non
built-in file) to delete.
- You can load Presets (current selected bank) by remotely sending a MIDI
Program Change message. The channel listening is the same for the MIDI
Note On/Off, You can configure this setting through ‘Channel’ in the MIDI
Manager (see later for further details). The available range is 0 ÷ 127. A
value of zero will select the first preset in the list, a value of 1 for the
second etc… But no bank selection is supported yet.
- We suggest you disable the screen rotation, otherwise the accelerometer
doesn't work properly.
- Tap over the
Recovery Pins
(Matrix bottom) to change pin color to white
green or red. White pins are 2.7K Ohm resistance and green ones are 68K
Ohm. For the iVCS3 this translates as: white pins no attenuation, green
pins for 0.66, red pins will allow a connection to be adjusted between the
normal signal and its inverse. See ‘Essential and Recommended EMS
Modifications’ for more details.
-
MIDI Panic
sends a general Message ‘All Notes Off’, resets the DSP and
Keyboard.
-
Init
will reset to default values and removes the Matrix Connections and
Sequencer Grooves, a reset message will be displayed.
-
Create Random Sound
values for all of the parameters (not matrix and
Sequencer), including the Flanger and Compressor Effects. The result can
be very interesting and wayward.
!
Show the back panel of
iVCS3
see Back Panel section.
"
Enable/Disable the scrolling for the Main View.
Enable/Disable Accelerometer X/Y and LFO, see the Control
Manager for more details.
Содержание iVCS3
Страница 5: ......
