CONFIDENTIALITY STATEMENT
This document contains information that is private and Confidential, and is supplied on the express condition that it is not to be
used for any purpose other than the purpose for which it was issued, nor is it to be copied or communicated in whole or in part, to
any third party other than the recipient organization, without the prior written permission of EMS Technologies Canada, Ltd.
Copyright © EMS Technologies Canada, Ltd.
HSD Aeronautical Transceivers
4
SELECTIVE mode (Non-Stand-Alone mode)
In Selective mode, the HSD transceiver operates with an
AERO H/H+ system. The HSD hardware is installed in the
AERO H/H+ HPA equipment position.
Selective mode provides one or two channels of Swift64
data
or
AERO H/H+ calls.
If one or more Swift64 calls are in progress
when an AERO H/H+ call is attempted, any
incoming or outgoing Swift64 calls are pre-
empted to allow the AERO H/H+ call to
proceed.
If any AERO H/H+ calls are in progress,
Swift64 calls are not allowed by the system.
To operate in Selective mode, version 3.45
or higher of the control software is required.
Features:
•
Operation with any Inmarsat approved Aero-H
High Gain antenna
•
Integrates with ARINC 741 SATCOM
•
Configures to operate as either a single or dual
channel system
Supported services:
•
Bi-directional data throughput for sending and
receiving e-mail, surfing the Web, video
conferencing, and connecting to internal
intranets and Bulletin Board Systems (BBS)
•
ISDN interface
•
Voice communication through the existing Aero-
H/H+ SATCOM System
•
One or two channels of 64 kb/s channels
Ethernet and Mobile Packet Data (future
availability)