manualshive.com logo in svg

EMS Imaging XtremeIPC VSN1100 Series, Руководство пользователя

Поделиться
Скачать
EMS Imaging XtremeIPC VSN1100 Series Скачать руководство пользователя страница 82

The system will then boot from the graphics card identified first by the PCI Bus.

82

Advanced Users

13.5  Installing Additional 

XtremeVision-Pro

 Cards

As the number of required screens increase, the likelihood of reaching a system limitation or encountering problems increases 
The system limitations are the amount of address space` available and the capacity of the power supply.

13.5.1  Power

The amount of current a power supply can deliver on each voltage rail is limited. Often there is also a limit on the total power.

Each 

XtremeVision-Pro

 card requires 0.25A at +3.3V and 1.2A at +12V.

You can calculate the amount of current and the amount of power required for the 

XtremeVision-Pro

 cards. For example, the  

requirements for a 24-screen system of 

XtremeVision-Pro

 cards is calculated as follows:

Current

+3.3V 6 x 0.25A = 1.5A

+12V 6 x 1.2A = 7.2A

Power

( 3.3V x 1.5A ) + ( 12V x 7.2A ) = 91.35W

These are the requirements for the 

XtremeVision-Pro

 cards; you must take into account the requirements of all the other devices 

in the s

ystem.

13.5.2 

XtremeVision-Pro 

Jumper Links

Multiple 

XtremeVision-Pro

 cards may have had jumper links fitted,  when fitted the links control the order in which the display 

driver 

uses the 

XtremeVision-Pro

therefore any additional cards need to have their jumper links set accordingly.  Details on how the  

jumper links are set can be found in the 

XtremeVision-Pro

.  If a damaged card is being replaced, the new card must have the same 

jumper settings as the damage one coming out of the system.

13.5.3  Installing the Display Drivers

 

If any graphics cards are added (or removed) from the system the Display Drivers need to be re-installed from the Recovery 
Media that came with your system or by downloading the latest drivers from the 

EMS

 website. 

13.5.4  Screen Order

Any additional graphics cards will change the way the screens on your video wall are ordered.  The 

Vigi

Control  application has 

a screen order tool which can be used to configure which order the screens appear on the desktop.  This allows the screen order 

to be changed without physically swapping any of the output cables between graphics cards.

Advanced Users

Содержание XtremeIPC VSN1100 Series
























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды