5
If you have a sound card that can be connected to the drive, you can also connect the drive
(as Audio-Out) and the sound card (as Audio-in) with a 4-pin audio cable.
If your motherboard is integrated with built-in sound system, plug the 4-
pin audio cable into the CD-IN connector on the motherboard as Audio-
in.
1. 6. Connect the USB cable at the back of the drive to the USB header on the computer’s
motherboard. The red wire of the cable needs to be plugged into Pin 1 on the board. I
This drive supports USB
2.0
and if you connect to USB 1.1 connector, only
transfer rate of USB 1.1 will be available.
USB Header
2 / 7
White/D-
Braided Shield Ground
Error-Proof Pin
Black/Ground
Green/D+
5
10
4 / 9
3 / 8
Mother
Board
Signal
Red/Vcc
Pin#
1 / 6
IDE
Red Wire
Error-Proof Pin
USB
Red Wire
If the connection is correct, the lower right LED on the front panel will
light
green
.
