Powering the ParaEq MKII
Go to www.empresseffects.com/power for a
full list of compatible power supplies.
Please note: The Empress ParaEq MKII
requires at least
300
mA of current to function
properly. Any power supply rated at 9V DC,
supplying negative tip polarity and at least
300
mA of current should work.
Legal Stuff
FCC Compliance
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could void the
user’s authority to operate the equipment under FCC rules
Содержание ParaEq MKII
Страница 1: ...USER MANUAL mkII...
