Empire VFIL18N, Инструкция по установке и руководство пользователя

Страница: 16 / 40

26532-2-0410 Page 16
Flames from the pilot (near the center of the burner) as well as the
main flame should be visually checked as the burner assembly is
installed and initially operated.
In normal operation at full rate, the flame appearance should be
random yellow flames above the burner.
NOTE: all flames will be random by design, flame height will go
up and down.
Avoid any drafts that alter burner flame patterns. Do not allow fans
to blow directly into fireplace. Do not place a blower inside the
burner area of the firebox. Ceiling fans will create drafts that alter
flame patterns. Sooting and improper burning will result.
During manufacturing, fabricating, and shipping, various
components of this appliance are treated with certain oils, films or
bonding agents. These chemicals are not harmful, but may produce
annoying smoke and smells as they are burned off during the initial
operation of the appliance, possibly causing headaches or eye or
lung irritation. This is a normal and temporary occurrence.
The initial break-in operation should last 2-3 hours with the burner
at the highest setting. Provide maximum ventilation by opening
windows or doors to allow odors to dissipate. Any odors remaining
after this initial break-in will be slight and will disappear with
continued use.
OPERATION INSTRUCTIONS/FLAME APPEARANCE
!
Figure 14
To remove top cover to gain access to gas valve for hookup of gas
line and burner securement, remove three (3) #8 x 1/2" screws at
the lower front of the burner assembly, then rotate the top cover
upward.
Figure 15
To remove the top cover, rotate the cover upward, shift 3/8" to the
right, then rearward to release the locking tabs at the back of the
burner base.