Page 1
INSTALLATION INSTRUCTIONS
AND OWNER’S MANUAL
SEE-THRU BURNER
(REQUIRES VENTED DECORATIVE
LOG SET)
FOR INSTALLATION IN
SOLID-FUEL BURNING FIREPLACES
MANUAL MODELS
B3MSTHK(18,24,30)STN-1
MILLIVOLT MODELS
B3RSTHK(18,24,30)STN-1
Installer: Leave this manual with the appliance.
Consumer: Retain this manual for future reference.
GAS-FIRED
IMPORTANT! Read these instructions
carefully before installing or operating this
gas appliance. These instructions should
be left with the homeowner for future
reference.
WARNING
If the information in this manual is not
followed exactly, a fire or explosion may
result causing property damage, personal
injury or loss of life.
— Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
— WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch; do
not use any phone in your building.
• Immediately call your gas supplier
from a neighbor’s phone. Follow the
gas supplier’s instructions.
• If you cannot reach your gas supplier,
call the fire department.
— Installation and service must be
performed by a qualified installer,
service agency or the gas supplier.
DANGER
If not installed, operated and maintained
in accordance with the manufacturer’s
instructions, this product could expose
you to substances in fuel or from fuel
combustion which can cause death or
serious illness.
CONGRATULATIONS on the purchase of
your new SEE-THRU GAS BURNER! Your
Decorative Gas Burner is designed and
intended for installation in an approved,
existing, fully vented, wood-burning fireplace,
with a gas hook-up.
This appliance must be installed only in a solid-
fuel burning fireplace with a working flue and
construction of noncombustible materials.
The vent damper must have a damper
clamp attached to it to keep the damper from
accidentally closing during operation.
This unit is NOT for use with solid fuel. Solid
fuels shall NOT be burned in a fireplace where
a decorative appliance is installed.
