17
8. DISASSEMBLY AND MAINTENANCE (Cont’d)
Trigger:
The Trigger assembly is attached to the right side shell and should only be removed for
maintenance or cleaning.
Regulator:
Once the shells are separated, the regulator assembly can be lifted out.
Loader:
Once the shells are separated, the loader assembly can be lifted out. Make sure to carefully
disconnect the two wiring connectors before removing for cleaning or maintenance.
Selector Arm:
It is not necessary to remove the selector arm when dissembling the D*Fender. It is removed
with a 1/16” hex wrench.
Note: The selector arm is keyed into the selector shaft. Make sure they are aligned before
reinstalling the selector arm screw.
Sling Adapter:
Using a 1/8” hex wrench, remove the one screw which holds the sling adapter in place.
The sling adapter can be placed in four locations or removed completely. The four holes are
10-32 threaded to accept most sling mounting adapters.
9. STORAGE AND TRANSPORTATION
WARNING:
Never carry your Marker uncased when not on a playing field. The non-playing public and
law enforcement personnel may not be able to distinguish between a paintball marker and
firearm. For your own safety and to protect the image of the sport, always carry your Marker
in a suitable marker case or in the box in which it was shipped. When you are finished using
your Marker it is important that you prepare it for storage. This will not only serve to increase
the life of the marker, but will assure optimum performance on your next outing.
• The marker must be clear of all paint and air sources when not being used.
• Be sure to have marker in “Safe Mode” when not in use.
• Make sure a barrel blocking device is in place.
• Store your Marker and propellant in cool dry place.
• Keep your Marker away from unsupervised children.
• Your Marker must be free of all paint and not attached to a propellant source while being
transported to and from the playing field.
• Observe and obey all local, state and federal laws concerning the transportation of paint
ball markers. For information concerning any of the laws in your area, contact your local
law enforcement.
• Always store the marker in a secure location when not in use so as to prevent access by
unauthorized persons.
CAUTION:
Paintballs may remain in the feed tube system after the loader
section is empty. Always check for paintballs in the feed tube and breech to
prevent accidental discharge!
