10
6. ELECTRONIC SETTINGS (Cont’d)
Settings Mode LEDs:
Navigating Through Settings:
The Trigger is used for all navigation and modification of the settings in Settings Mode.
To cycle through the settings press and release the Trigger.
Modifying Settings:
• Navigate to the desired setting to be modified (see chart above for LED/Setting )
• Press and hold the Trigger until the LED starts blinking. The LED will blink the number of
times equal to the current setting value.
• Once the LED is done blinking you can press and release the Trigger the number of times
equal to the new setting value. To leave settings unchanged do not press the Trigger.
• When done entering the new value release the Trigger and wait approximately 3 seconds.
After this time the LED’s will cycle through an array of colors indicating the setting has
been saved.
Explanation of Settings:
Firing Mode (Solid Red):
Default: 5 blinks = Select Fire Mode
There are 5 firing modes available: Semi Automatic, Burst Mode, Ramp Mode, Full Auto
Mode and Select Fire Mode.
Semi Auto
– The marker will fire 1 time each time the Trigger is pulled.
Burst
– The marker will start in Semi Auto mode. When the marker is fired the amount of
times equal to the Ramp Start Setting, the marker will fire a burst of paintballs at a rate of
the Max Rate of Fire Setting. The amount of shots that come out with each burst is equal to
the Burst Shot Count setting. If the Trigger is idle for 1 second the shot count resets and the
marker will shoot in Semi Auto again.
Ramp
- The marker will start in Semi Auto mode. When the marker is fired the amount of
times equal to the Ramp Start Setting at a rate greater than or equal to Ramp Sustain setting,
the marker will then fire multiple shots per Trigger pull at the rate of the Max Rate of Fire
Setting. If the Trigger is idle for 1 second or the Trigger is pulled at a rate of less than the
Ramp Sustain setting, the marker will shoot in Semi Auto again.
Full Auto
- The marker will start in Semi Auto mode. When the marker is fired the amount of
times equal to the Ramp Start Setting, the marker will fire continuously at a rate equal to the
Max Rate of Fire setting as long as the Trigger is held down. If the Trigger is idle for 1 second,
the shot count starts over and the marker will shoot in Semi Auto again.
lED
Solid Aqua
Solid Purple
Solid White
Flickering Red
Flickering Green
Solid Amber
Solid Blue
Solid Green
Solid Red
Firing Mode
Max Rate of Fire
Dwell
Trigger De-bounce
Ball In Place Time
Ramp Start
Ramp Sustain
Burst Shot Count
Calibrate Selector
SETTING
# OF BlINkS
5
4
3
2
1
Semi Auto
Burst
Ramp
Full Auto
Select Fire
FIRING MODE
