Empire Comfort Systems VFSM-18-3 Скачать руководство пользователя страница 10

27829-5-0115

Page 10

ReQuIReMeNTS foR cANAdA

This unit 

cannot

 be installed in a UNVENTED application, 

this unit

  can  only 

be installed as a VENTED application 

with these requirements.

IMPoRTANT SAfeTy INfoRMATIoN

This unit complies with ANSI Z21.60 and CGA 2.26 Decora-

tive Gas Appliances For Installation In Solid Fuel Burning 

Fireplaces. Do not burn wood or solid fuels in a fireplace 

where a decorative gas log set is installed. This appliance is 

for installation only in a solid fuel burning fireplace, masonry 

fireplace or manufactured fireplace.

 

wArNING

Any modification to this gas log set or to controls can be 

dangerous. Improper installation or use of the gas log set 

can cause serious injury or death from fire, burns, explosion 

or carbon monoxide poisoning.

1.  Please follow all local codes regarding installation, 

combustion and ventilation air or in the absence of 

local codes follow the National Fuel Gas Code ANSI 

Z223.1(U.S. installation), or CAN/CGA-B149, Installa-

tion Code (Canada installation).

2. Proper installation, burner pan location and log 

 

placement is important to achieve optimum look and 

performance of your gas log set. The logs have been 

designed for easy location and placement on the grate 

and must be followed for proper operation.

3.  Do not operate this log set with glass doors in the closed 

position. A fireplace screen must be in place when the 

log set is burning. Adequate combustion air must be 

provided  for  proper  venting.  All  flames  should  go  up 

and out the top of the firebox into the flue vent. If any 

flames float or curl forward into the room do not operate 

 

appliance.  Check  for  an  open  flue  and  adequate 

 

combustion air into the room. A damper clamp must 

be installed on the firebox damper to maintain an open 

flue  vent  condition.  Refer  to  page  16  InStALLInG 

 

DAMPER CLAMP

4.  Young children must be carefully supervised when  

they are in the same room as the gas log while in  

operation. Do not place stockings, clothing or any  

flammable material above or near the fireplace.

5.  Do not substitute or use materials other than those  

supplied for use with the log set.

6.  Also refer to IMPORTANT SAFETY INFORMATION on 

pages 7 and 9

 

of this manual.

 

wArNING

do NoT oPeRATe THIS GAS LoG SeT WITH GLASS 

DOOrS cLOSeD

•  Clothing  or  other  flammable  material  should  not  be 

placed on or near the appliance.

•  Do not place trash or other articles on the log set during 

operation.

•  During manufacturing, fabricating and shipping, various 

components of this appliance are treated with certain 

oils,  films  or  bonding  agents.  these  bonding  agents 

are not harmful but may produce annoying smoke and 

smells as they are burned off during initial operation of 

the appliance. This is a normal temporary occurrence. 

A window should be opened during the initial bake out 

period. 

•  Keep burner and control compartment clean. 

 

wArNING

Before installing in a solid fuel burning fireplace, the chim

-

ney flue and firebox must be cleaned of soot, creosote, 

ashes and loose paint by a qualified chimney cleaner.

•  Installation  and  repair  should  be  done  by  a  qualified 

service person. The appliance should be inspected 

before use and at least annually by a qualified service 

person. More frequent cleaning may be required due to 

excessive lint from carpeting, bedding materials, etc. It 

is imperative that control compartments, burners and 

circulating air passageways of the appliance be kept 

clean.

• 

do  not

  put  anything  around  the  fireplace  that  will 

 

obstruct the flow of ventilation air.

• 

do

 keep the appliance area clear and free from 

 

combustible material, gasoline and other flammable va

-

pors and liquids.

•  A yearly examination and cleaning of the venting system 

of the solid-fuel burning fireplace must be performed by 

a qualified agency.

• 

do

 make a periodic visual check of pilot and burners. 

Clean and replace damaged parts.

• 

do not

 use this appliance if any part has been under 

water.  Immediately  call  a  qualified  service  technician 

to inspect the appliance and to replace any part of the 

control system and any gas control which has been  

under water. 

•  never burn solid fuels in fireplace where a gas log set is 

installed.

•  this unit complies with AnSI Z21.60 Decorative Vented 

Appliances for Solid Fuel Burning Fireplaces. State or 

local codes may only allow operation of this appliance 

in  a  vented  configuration.  Check  your  state  or  local 

codes.

Содержание VFSM-18-3





























Отзывы: