29516-10-0713
Page 29
pROFLAME - Ip CONTROL SYSTEM
TRANSMITTER (REMOTE CONTROL WITH LCD DISpLAY)
The Proflame Transmitter uses a streamline design with a simple
button layout and informative LCD display (Figure 38).
The Transmitter is powered by 3 AAA type batteries. A Mode Key
is provided to Index between the features and a Thermostat Key is
used to turn on/off or index through thermostat functions (Figures
38 and 39).
Blue LCD display
UP/DOWN Arrow Key
ON/OFF Key
THERMOSTAT Key
MODE Key
Figure 38 - Proflame Transmitter
Low battery alarm
Child safety lock-out
Room
Temperature
Set Point
Temperature/Level/State
Flame ON
Thermostat
OFF/ON/SMART
Transmission
Figure 39 - Transmitter LCD display
RECEIvER
The Proflame Receiver (Figure 40a and 40b) connects directly to
the gas valve and stepper motor with a wiring harness. The Re-
ceiver is powered by 4 AA type batteries. The Receiver accepts
commands via radio frequency from the Transmitter to operate the
appliance in accordance with the particular Proflame system con
-
figuration. The Receiver three position slider switch can be set to
one of three positions: ON (Manual Override), Remote (Remote
control) or Off.
3 Positions Slider
PRG Key
Figure 40a - Proflame Receiver Body Front
14 PIN terminal
Figure 40b - Proflame Receiver Body Back