42929-2-0721
Page 5
Empire Comfort Systems Inc. • Belleville, IL
4. Once the framing is completed, install the Blower &
Base assembly as shown in
Figures 3 - 9.
The Blower &
Base assembly can be installed in the wall in any of four
positions which allows flexibility of the venting connection
to the blower.
14 1/2”
OFFSET FLANGE TO BE FLUSH WITH
INSIDE WALL, AND SECURED
BACK EDGE OF BLOWER BASE BRACKET TO
BE MOUNTED FLUSH TO THE INSIDE WALL
VENT CONNECTION
(RIGHT SIDE)
Figure 4
Figure 5
Figure 6
Figure 7
BACK EDGE OF BLOWER
BASE BRACKET TO
BE MOUNTED FLUSH
TO THE INSIDE WALL
OFFSET FLANGE TO
BE FLUSH WITH INSIDE
WALL, AND SECURED
14 ½"
TOP VENT
CONNECTION
VENT
CONNECTION
(LEFT SIDE)
VENT
CONNECTION
(RIGHT SIDE)
BOTTOM VENT
CONNECTION
14-1/2"