Empire Comfort Systems VFHS-10T-1, Руководство по установке, Страница: 12 / 28

Page 12 VFHS-20/10
PLACEMENT OF GLOWING EMBERS (ROCK WOOL)
Provided with the log set is a small bag of glowing embers (rock
wool) to be placed between logs on the flat metal surface of the
burner.
TOP VIEW OF LOG SET
Placement of glowing embers (rock wool)
Figure 15
Placement of the embers (rock wool) is very individual and light
coverage of the areas indicated will provide your best effects. We
recommend separation of the rock wool by hand and make your
coverage as light and fluffy as possible.
Place just enough embers (rock wool) on the burner to obtain the
glow and a gold yellow flame.
Do not place rock wool over large ports in rear portion of burner.
A thin layer of rock wool should be placed under open space
between the right and left middle logs.
Rock wool should not be placed in the area of the pilot assembly.
1. Remove shipping plate from burner pan.
2. Place two (2) log grates onto two (2) left, front pins and two
(2) right, front pins on burner pan.
Figure 13
3. Place rear (#1) log onto two (2) pins on rear log support.
4. Place left, front (#2) log onto two (2) left, front pins on burner
pan.
5. Place right, front (#3) log onto two (2) right, front pins on
burner pan.
6. Place branch (#4) log onto two (2) pins on rear (#1) log.
LOG PLACEMENT
Figure 14
Refer to Figures 13 and 14 for the following warning.
Warning: Failure to positon the parts in accordance with this
diagram or failure to use only parts specifically approved with
this heater may result in property damage or personal injury.