background image

28096-23-1016

Page 4

SAFETY InFoRMATIon FoR USERS oF LP-GAS

Propane (LP-Gas) is a flammable gas which can cause 

fires and explosions. In its natural state, propane is odor

-

less and colorless. You may not know all the following 

safety precautions which can protect both you and your 

family from an accident. read them carefully now, then 

review them point by point with the members of your 

household. someday when there may not be a minute to 

lose, everyone's safety will depend on knowing exactly 

what to do. If, after reading the following information, 

you feel you still need more information, please contact 

your gas supplier.

lP-Gas warnInG odor

If a gas leak happens, you should be able to smell 

the gas because of the odorant put in the lP-Gas. 

that's your signal to go into immediate action!

•  Do not operate electric switches, light matches, use your 

phone. Do not do anything that could ignite the gas.

•  Get everyone out of the building, vehicle, trailer, or area. 

Do that IMMEDIATELY.

•  Close all gas tank or cylinder supply valves.

•  LP-Gas is heavier than air and may settle in low areas 

such as basements. When you have reason to suspect 

a gas leak, keep out of basements and other low areas. 

Stay out until firefighters declare them to be safe.

•  Use your neighbor's phone and call a trained LP-Gas 

service  person  and  the  fire  department.  Even  though 

you may not continue to smell gas, do not turn on the 

gas again. Do not re-enter the building, vehicle, trailer, 

or area.

 Finally,

 let the service man and firefighters check for 

escaped gas. Have them air out the area before you 

return. Properly trained LP-Gas service people should 

repair the leak, then check and relight the gas appliance 

for you.

no odor detected - odor Fade

some people cannot smell well. some people cannot 

smell  the  odor  of  the  chemical  put  into  the  gas.  You 

must find out if you can smell the odorant in propane.

 

Smoking can decrease your ability to smell. Being around an 

odor for a time can affect your sensitivity or ability to detect 

that odor. Sometimes other odors in the area mask the gas 

odor. People may not smell the gas odor or their minds are 

on something else. Thinking about smelling a gas odor can 

make it easier to smell.

the odorant in lP-gas is colorless, and it can fade under 

some circumstances.

 For example, if there is an under

-

ground leak, the movement of the gas through soil can filter 

the odorant. Odorants in LP-Gas also are subject to oxidation. 

This fading can occur if there is rust inside the storage tank 

or in iron gas pipes.

The odorant in escaped gas can adsorb or absorb onto or 

into walls, masonry and other materials and fabrics in a room. 

That will take some of the odorant out of the gas, reducing 

its odor intensity.
LP-Gas may stratify in a closed area, and the odor intensity 

could vary at different levels. Since it is heavier than air, there 

may be more odor at lower levels. Always be sensitive to the 

slightest gas odor. If you detect any odor, treat it as a serious 

leak. Immediately go into action as instructed earlier.

soMe PoInts to reMeMBer

• 

Learn  to  recognize  the  odor  of  LP-gas.

 Your local 

LP-Gas Dealer can give you a "Scratch and Sniff" pam-

phlet. Use it to find out what the propane odor smells like. 

If you suspect that your LP-Gas has a weak or abnormal 

odor, call your LP-Gas Dealer.

•  If you are not qualified, do not light pilot lights, perform 

service, or make adjustments to appliances on the LP-Gas 

system. If you are qualified, consciously think about the 

odor of LP-Gas prior to and while lighting pilot lights or 

performing service or making adjustments.

•  Sometimes a basement or a closed-up house has a musty 

smell that can cover up the LP-Gas odor. Do not try to 

light pilot lights, perform service, or make adjustments 

in an area where the conditions are such that you may 

not detect the odor if there has been a leak of LP-Gas.

•  Odor fade, due to oxidation by rust or adsorption on walls 

of new cylinders and tanks, is possible. Therefore, people 

should be particularly alert and careful when new tanks 

or cylinders are placed in service. Odor fade can occur 

in new tanks, or reinstalled old tanks, if they are filled 

and  allowed  to  set  too  long  before  refilling.  Cylinders 

and tanks which have been out of service for a time may 

develop internal rust which will cause odor fade. If such 

conditions are suspected to exist, a periodic sniff test of 

the gas is advisable. 

If you have any question about 

the gas odor, call your lP-gas dealer. a periodic sniff 

test of the lP-gas is a good safety measure under 

any condition.

•  If, at any time, you do not smell the LP-Gas odorant and 

you think you should, assume you have a leak. Then take 

the same immediate action recommended above for the 

occasion when you do detect the odorized LP-Gas.

•  If you experience a complete "gas out," (the container 

is under no vapor pressure), turn the tank valve off im-

mediately. If the container valve is left on, the container 

may draw in some air through openings such as pilot light 

orifices. If this occurs, some new internal rusting could 

occur. If the valve is left open, then treat the container 

as a new tank. Always be sure your container is under 

vapor pressure by turning it off at the container before 

it goes completely empty or having it refilled before it is 

completely empty.

Содержание ONI-24-2





















Отзывы: