EMPI Active
User Guide
10
EMPI Active
User Guide
Quick Reference
continued
Change Intensity
When your Empi Active device has been on for 20
seconds and no buttons have been pressed, the
unit automatically becomes “locked” at the set
intensity. Press
to unlock the unit.
Figure 5
Then press either
or
to
adjust the intensity of your therapy.
If you press
when the unit is already at its
lowest possible setting — or press
when
the unit is already at its highest possible setting
— the blue light will flash quickly.
End a Therapy Session
To end a therapy session, press and hold
1.
for at least 1 second.
The light
will first glow steady blue for a few seconds and will then flash four times This is
the “goodbye” signal. Your Empi Active device is now turned off.
Carefully remove the electrode or specialized wrap from your skin. (Leave the
2.
device attached to the specialized wrap unless you need to recharge the device.)
Follow the instructions on the electrode or specialized wrap package
3.
for storage.
If needed, use adhesive remover to remove gel/adhesive from your skin.
4.
Use skin cream to moisturize your skin after removing the electrode or
5.
specialized wrap.
Store the components in your carrying bag.
6.
Detailed Instructions
Introduction
This section gives you complete details on how to use your Empi Active device.
Before operating the device, read the previous sections of this user guide that
describe the device and its features, including the
“Prescribing Information”
section beginning on page 3. To get the most from your therapy, follow the
instructions received from your healthcare professional. Use the device only for
the symptoms your healthcare professional has discussed with you. Contact your
healthcare professional if you have questions or problems — or if you have new
symptoms or painful areas. Your healthcare professional is most familiar with your
situation and can give you the best advice. You may also contact Empi Customer
Service at 800.328.2536.
Your Empi Active Device
Figure 6
shows your Empi Active device and its main parts:
•
— Turns the device on and off
•
— Increases stimulation
•
— Decreases stimulation
Connector Slot
•
— Attaches the device to an electrode, specialized wrap or to the
battery charger
Status Light
•
— Shows the device’s current status
Figure 5:
Decrease
Intensity
13051_360372A.indd 10
6/7/11 8:27:01 PM
Содержание Active
Страница 1: ...Managing Your Pain with Empi Active ...
