Empi 199580-001, Руководство пользователя

Страница: 19 / 52

Select User’s Manual
18
Select User’s Manual 19
System Components System Components
Operating Buttons
These are the buttons you use to program your therapy settings, such as selecting the
treatment program and intensity.
•
On/Off
– used to turn the stimulator on and off.
•
Quick Select programs
– used to select the most commonly used
programs for a particular body area (Knee, Shoulder, Low Back/Hip,
Hand/Wrist, and Back).
•
Mode
– used to select one of four program options (Continuous, Burst,
SMP and Modulation).
•
Set
– used to change the therapy session parameters (Rate, Cycle Time,
and/or Span Percentage) based on which program option is selected. Also
used to access the Timer function.
•
Ch 1
Increase – used to increase the intensity of the electrical current
sent through the channel 1 output jack.
•
Ch 1
Decrease – used to decrease the intensity of the electrical current
sent through the channel 1 output jack.
•
Ch 2
Increase – used to increase the intensity of the electrical current
sent through the channel 2 output jack.
•
Ch 2
Decrease – used to decrease the intensity of the electrical current
sent through the channel 2 output jack.
NOTE:
Pressing the Up or Down intensity controls increases or
decreases the intensity in 0.5 increments. Intensity range is 0.0 to 60.0.
The Up or Down intensity controls can be held down to increase or
decrease the intensity faster.
Output Jacks
The output jacks are where you connect the lead wires to the device. The output jacks are
labeled on the LCD display. Channels 1 and 2 operate independently. There are two (2)
LED indicator lights, one for each channel.
NOTE:
At a high rate, the LED indicator light will flash, looking like it is constantly on. At a
low rate, the LED indicator light will flash slowly.
Intensity Lockout Feature
Once the intensity is raised above zero, with no activity for greater than 15 seconds, the
unit will initiate lockout of the increase intensity buttons. A lock symbol will appear on the
display to signify that this has occurred. This feature prevents any unintended key presses
to increase intensity or change the program option.
On/Off Indicator Lights
The On/Off Indicator Lights indicate that the device is operational. The brightness of
flash changes with the output intensity. As the intensity of the stimulation increases,
the brightness of the light also increases. (Above 40 pps, the light will appear to be
on continuously.)
Carrying Case
A carrying case is included to help protect the Select system and keep it clean.
Store your device and its components in the case when they are not in use.
Battery Compartment
battery compartment is located on
the back of the device. Refer to pages 22-23 for battery installation.
Documentation
Read and understand this user’s manual carefully before operating the Select device.
The user manual is provided in English and Spanish. If you have questions or cannot
read these languages, contact your clinician.
Belt Clip
The belt clip is flexible so you can clip the device to your clothing, allowing you to
receive your treatment while going about your daily activities.
Battery
Compartment
* To unlock, press the Ch 1 or Ch 2 decrease button.
user_manual_NEW_BH_edit_r5.indd 18-19 3/3/08 2:08:38 PM
alkaline batteries. The The device is supplied with “AA”