Empertech KB-DA2250, Руководство пользователя

Страница: 14 / 23

6
NO Name Description
3
Audio input
and control
ports
FAULT
A
If a DA fault occurs, it is protected, or it is self-tested,
ports A and B experience a short circuit.
B
CH1
+
Balanced positive input
-
Balanced negative input
G
Grounding (Connect to the “-“ port if the input is an
unbalanced input connection.)
CH2
+ Balanced positive input
-
Balanced negative input
G
Grounding (Connect to the “-“ port if the input is an
unbalanced input connection.)
4
Audio output
ports
CH1
100V 100V high impedance audio output
70V
70V high impedance audio output
COM Common
CH2
100V
100V high impedance audio output
70V 70V high impedance audio output
COM Common
5 Cooling fan
6 Main power supply power port
Supplies electricity to the main power supply
7
Fuse T10AL250V
8 Grounding terminal
Connects the grounding wire
Table 3 RJ45 Port
PIN Description Figure
1 Balanced positive input of CH2
2
Balanced negative input of CH2
3
DA fault information output

When the DA is working properly, the output voltage is VCC
(12V-24V).

When the DA faults, is protected, or undergoes self-testing,
the output voltage is GND (0V).
4
Balanced positive input of CH1
5
Balanced negative input of CH1
6
GND (0V)
7
VCC (12V-24V, powered by an external device)
8
Self-test port

When the DA output voltage is VCC (12V-24V), the DA is
being self-tested.

When the DA has no input voltage, the DA is working
normally.