EMPERO EMP.7KG021, Инструкция по эксплуатации

Страница: 9 / 18

9
GAS RANGES WITH OVEN
Kasap Tip Dik Buzdolapları
G INJECTOR CHANGE AND GAS SETTING
GAS RANGE BURNER-INJECTOR CHANGE CHART
Gas
Group
Gas
Small Middle Big Oven Pilot
Injector

mm
Injector

mm
Injector

mm
Injector

mm
Injector

mm
Injector

mm
2
G20 1,6 1,9 2,15 1,35 2,15 0,41
G25 1,6 1,9 2,15 1,3 2,15 0,41
3
G30
30
mbar
1 1,2 1,35 0,85 1,35 0,22
50
mbar
0,85 1 1,6 0,72 1,15 0,20
G31
37
mbar
1 1,2 1,35 0,85 1,35 0,22
30
mbar
0,95 1,15 1,3 0,81 1,3 0,20
Change of Upper Burner Injector;
1.
Take off the burner’s upper lid and upper casting grill (Image 1)
2.
Change ‘A’ injector by paying attention the datas on the chart with suitable injector.
(Image 2)
3.
Adjust burner air inlet by loosening ‘B’ bolt .(Image 2)
4. Change C injector by paying attention to the datas at chart with suitable injector.For
this it is enough to take off ‘D’ fitting and pull the gas pipe to down. (Image 3)
Change of Oven Injectors;
1.
Take off ‘F’ bolts from oven door lower sheet metal ‘E’ (Image 5)
2.
Change oven injector ‘I’ with suitable injector (Image 6)
3.
Change the oven pilot flame injector ‘C’ with suitable injector (Image 3)
Setting of Half Flame;
1. Remove the tap button and set by turning tap half flame screw (K) with suitable
screwdriver.(Image 4) Turn it to left for transformation from LPG to N.G,turn it right for
transformation from N.G to LPG.
2. After this process,operate the appliance and set it not to be deflated during transition
from full flame to half flame.