background image

7

 

 

UNPACKING    

During transportation, protective packaging was used to protect the appliance 

against any damage. After unpacking, please dispose of all elements of 

packaging in a way that will not cause damage to the environment. 

All materials used for packaging the appliance are environmentally friendly; they are 100% 

recyclable and are marked with the appropriate symbol. 

Caution! During unpacking, the package pieces, etc. should be kept children. 

 
DISPOSAL OF THE APPLIANCE 

Electrical and electronic devices may not be disposed of with domestic waste. 

Consumers are obliged by law to return electrical and electronic devices at the 

end of their service lives to the public collecting points set up for this purpose or 

point of sale. Details to this are defined by the national law of the respective 

country. This symbol on the product, the instruction manual or the package 

indicates that a product is subject to these regulations. By recycling, reusing the 

materials or other forms of utilizing old devices, you are making an important 

contribution to protecting our environment. 

 

 
 
 
 

 

 

 

 

                                                 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Содержание EMPV-24WOB21


























Отзывы: