Usage as combiner:
•
Connect F-socket “SAT” to LNB
•
Connect F-socket “TERR” to terrestrial antenna
•
Connect F-socket “INP/OUT” to common downlead
Usage as splitter:
•
Connect F-socket “INP/OUT” to common downlead
•
Connect F-socket “SAT” to satellite receiver (tuner DVB-S/S2)
•
Connect F-socket “TERR” to terrestrial receiver (tuner DVB-T/T2)
6) Product Settings
The product has no adjustable options.
7) Safety
Due to security reasons the product and wiring in which the product is connected,
must be grounded properly. Make sure the antennas are grounded properly.
Connect all devices to power grid only after all connections are finished and
checked. If you have to enter places with a risk of fall, pay attention to your safety.
Never work on the wiring (including terrestrial receivers, TVs) during or before a
storm. A lightning stroke into the antenna may cause dangerous overvoltage in the
product metallic parts.
The product should be disconnected from the wiring immediately if it gets into
contact with liquids (dropping water, spilled drinks etc.).
8) Product Maintenance
The maintenance operation is especially cleansing of the product. Use only dry
cloth to clean the product and do not use any liquid agents.
Coaxial cables installed outdoors should be replaced once in a few years.
Unscrew all F connectors and clean connector contacts, resp. shorten the coaxial
cable by approx. 2 cm, every 2 years.
3 of 4
