3) Product Takeover
Make sure that the product is not damaged. In the case of damage please contact
your dealer.
4) Product Storing and Installation
We recommend the device to be installed and serviced by the qualified
technician.
The product must not be stored and installed:
•
in the place with excessive humidity
•
in the place with dropping or splashing water,
•
in the place with excessive dust pollution, mechanical vibrations or
impacts
•
in the place out of temperature limits specified in the section 2)
Technical Specifications
•
close to heat sources (radiators or air ventilators, direct sunshine etc.)
•
in the reach of children
Use the apparatus only in moderate climates (not in tropical climate).
Fix the product firmly on a wall or another hard and inflammable surface with
screws and dowels. The product shall be in no case held only by the connected
cables.
Further instructions:
•
ensure the free space at least 10 cm around the product for the
sufficient air circulation
•
do not cover the product (with curtains etc.)
•
do not place any containers with liquids (vases, glasses etc.) or naked
flame sources (lighted candle etc.) on the product or near the product
5) Product Connection
Connect the product in accordance with this manual and valid regulation in you
country. Use high quality 75 Ω coaxial cable designed for satellite reception. The
coaxial cables shall not be broken, the minimum bending radius should be 5 cm.
Mount the F connectors (screw, crimp or compress type) on the ends of coaxial
cables. Connect the F connectors into the F sockets of product and fasten them
with an appropriate force.
2 of 4
