Page 4
Official XMC-1 Firmware Update
March 26, 2015
Version 3.0
Update Procedure:
•
Download the Instructions and the Firmware Update file ZIP archive.
•
Extract the firmware update file (one file) from the ZIP archive you downloaded.
•
Copy the firmware update file onto a standard FAT32 formatted USB flash drive.
•
Insert the USB drive into the USB port on the front or back of the XMC-1.
•
Press the Menu button.
•
Use the Up/Down buttons to select Setup; press the Right button to enter the Setup menu.
•
Use the Up/Down buttons to select Advanced; press the Right button to enter the Advanced
Setup menu.
•
Use the Up/Down buttons to select Firmware Update; press the Right button to enter the
confirmation screen.
•
Use the Up button to confirm your choice; the confirmation box will change to “X”.
•
Use the Left button to confirm the update.
ONCE YOU PRESS THE LEFT BUTTON THE UPDATE WILL COMMENCE.
•
During the update process the screen will display the names of the various firmware modules
being updated; for some modules, you will see a progress bar while the update is completed.
The entire update process will take approximately three to five minutes - or less.
•
When the update process is complete, the XMC-1 will switch into Standby mode.
•
Remove the USB drive containing the firmware update.
•
When you turn the XMC-1 back on the update will be complete and your XMC-1 will be ready
to use.
Congratulations, you have just successfully updated the
firmware on your XMC-1. If you have any problems or
questions, please contact Emotiva Technical Support for
assistance.
