Page 2
Official XMC-1 Firmware Update
March 26, 2015
Version 3.0
Firmware Update
Version:
3.0
Applies to:
XMC-1; All Units; All Previous Firmware Versions.
Purpose:
Added Some New Features.
Improved Functionality of Some Existing Features.
Fixed Some Minor Bugs.
Level of Importance:
Mandatory.
Details:
New Features:
•
Added support for 4k/60Hz video.
•
Added choice of several color themes for the OSD, including one optimized for 4k.
•
Added the ability to import filter settings directly from Room EQ Wizard (REW)
(this includes the ability to save and load filter settings via standard XML files).
Improved Functionality:
•
Added more granular control over CEC functions.
•
Added improvements to the audio muting strategy to make it “smarter”
(the muting will now do a better job of blocking noises you don’t want to hear, especially with
certain cable boxes, and of not clipping off the first few milliseconds of some audio tracks) .
•
Adjusted the gain set in the Dirac preset to more closely match the levels in other presets.
Bug Fixes:
Several minor bugs were fixed (based on our testing and user input), including:
•
Noise generator was clipping with some combinations of settings and modes.
•
Zone 2 failed to remember current volume setting through a cold boot.
•
No audio pass-through in Video on Standby Mode with some Sony Bravia sets.
•
Crash if you removed the USB stick while confirming or after its presence was confirmed.
•
Trims and triggers associated with the rear channels were not working properly in some modes.
•
Wrong sample rate and bit depth shown when using HDMI video with alternate audio sources.
