background image

FCC Interference Statement

Note: This equipment has been tested and found to comply with the limits for a Class B 

digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide 

reasonable protection against harmful interference in a residential installation. This 

equipment generates, uses and can radiate radio frequency energy and, if not installed 

and used in accordance with the instructions, may cause harmful interference to radio 

communications. However, there is no guarantee that the interference will not occur in 

a particular installation. If this equipment does cause harmful interference to radio or 

television reception, which can be determined by turning the equipment off and on, the 

user is encouraged to try to correct the interference by one or more of the following 

measures: 
Reorient or relocate the receiving antenna. 
Increase the separation between the equipment and receiver. 
Connect the equipment into an outlet on a circuit different from that of the receiver. 
Consult the dealer or an experienced radio/TV technician for help. 

For questions regarding service, please contact: 
Emotiva Audio Corporation 

135 Southeast Parkway Court 

Franklin, Tennessee  

37064
(615)-790-6754
www.emotiva.com

!

DO NOT defeat the safety purpose of a grounding or polarized plug by removing ground 

pins or using unsafe adapters. A polarized plug has two blades - one wider than the 

other. A grounding type plug has a third ground prong in addition to the two main 

conductors. The wide blade or third grounding prong is provided for your safety. If the 

provided plug does not fit your outlet, consult an electrician to replace your obsolete 

outlet. If you replace the X-Ref subwoofer power cord, only use one of similar type and 

equal or greater current rating.
You should seek service for your X-Ref subwoofer by qualified service personnel if any 

of the following occur:
1. The power-supply cord or the plug has been damaged 

2. The X-Ref subwoofer has been exposed to rain or had liquids spilled onto or into it 

4. The X-Ref subwoofer exhibits a marked change in performance 

5. The X-Ref subwoofer has been dropped, or its enclosure or chassis is damaged.
NOTE: TO COMPLETELY DISCONNECT THE X-REF SUBWOOFER FROM THE 

AC POWER MAINS, DISCONNECT THE AC POWER CORD FROM THE AC 

RECEPTACLE.
NOTE: THE X-REF SUBWOOFER’S AC POWER CORD MUST REMAIN READILY 

ACCESSIBLE AT ALL TIMES.
The X-Ref subwoofer should only be cleaned as directed in the Operators Manual. Avoid 

spraying or pouring liquids directly onto the X-Ref subwoofer.

CAUTION

CAUTION: TO REDUCE THE RISK
OF ELECTRICAL SHOCK, DO
NOT REMOVE COVER. NO USER
SERVICEABLE PARTS INSIDE. 
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

Содержание X-Ref 10

































Отзывы: