Emotiva VAC, Руководство по установке

Страница: 9 / 10

9
Make sure that the mounting dogs spin freely and are clear of the gusset prior to
inserting the speaker into your newly cut opening. Center the speaker in the cut-out
hole, align it with the other speaker if applicable, and turn the four or six locking screws
clockwise until the speaker is drawn up snugly to the wall board from behind, clamping
the speaker in place. Try to tighten each screw equally. Do not over tighten the screws.
Replace the speaker grill by gently pressing it into place. Note: Wash your hands first,
dirt can easily transfer from your fingers to the grills. Use a small amount of included
adhesive to secure the grills to the speakers.
PAINT
If desired, t
he speaker’s outer surface will accept ordinary latex wall paint or aerosol
spray paint. Because the speaker baffle surface behind the grille should remain
unpainted, you may need to mask this area. Cover the speaker’s interior black surface,
woofer and tweeter. Paint the outer speaker frame and grille separately. (Grille painting
hint: Brushing and rolling are nearly impossible since the grill holes fill up easily. Try
aerosol paint or purchase an aerosol kit and thinner from your local paint store to use
your existing paint.)