Emotiva Stealth DC-1, Руководство пользователя

Страница: 16 / 32

Page 12
Stealth DC-1 Stereo D/A Converter - Operator’s Manual
The Stealth DC-1 Stereo 24-192 Balanced DAC (Remote)
ON OFF
DIM
VOL+
VOL-
MUTE
AES/EBU USB
OPT ANALOG
COAX BNC
1
2
3
4
Note: you must remove the insulator tab
from the batteries in the stealth DC-1 remote
control before using it for the first time.
(See the Hardware Configuration section for
details.)
1. On and Off buttons
The On button turns the DC-1 On (from Standby);
the Off button returns the DC-1 to Standby mode.
Note: The stealth DC-1 will not respond to the
Volume / standby knob, or the on button on
the remote control, unless the rear panel main
AC Power switch is first turned On.
2. Dim button
This button controls the brightness of the
DC-1’s OLED display. The display has five levels of
brightness - ranging from dim to bright. Each time
you press the button, the display will get one step
brighter; when the display is at full brightness, the
next press will return it to its dimmest setting.
3. Mute and Volume buttons
The Vol+ and Vol- buttons control the output level
of the Stealth DC-1.
Note: The headphone level on the stealth DC-1
is intelligent. When no headphone is plugged
in, the Volume buttons control the main
output level; when a headphone is plugged
in, the Volume buttons control headphone
level. Each is stored independently, and the
DC-1 will return to its previously set main or
headphone output level when a headphone is
plugged in or unplugged.
Pressing the Mute button sets both the main and headphone output levels to the
Mute Level that you have configured in the Configuration Menu (the default is Silent).
Pressing Mute a second time returns you to your previous Volume setting.
Note: If your configured Mute level is louder than your current Volume
setting, pressing Mute will RAISE the Volume to the configured Mute Level.
4. Input Selector buttons
These buttons select which input is active.