Emotiva DMC-1, Руководство пользователя

Страница: 34 / 96

Page 34
TRIGGER
INPUT
ON
SIG-
NAL
TRI-
GGER
T15AL 250V
AC 120V 60
Hz
UNBALANCE
D
INPUT
BALANCED
INPUT
OUTPUT
UNBALANCE
D
INPUT
BALANCED
INPUT
OUTPUT
UNBALANCE
D
INPUT
BALANCED
INPUT
OUTPUT
UNBALANCE
D
INPUT
BALANCED
INPUT
OUTPUT
UNBALANCE
D
INPUT
BALANCED
INPUT
OUTPUT
UNBALANCE
D
INPUT
BALANCED
INPUT
OUTPUT
UNBALANCE
D INPUT
BALANCED
INPUT
OUTPUT
Designed in U
SA Built with prid
e in China
Connecting an Amplifier (MAIN ZONE)
This configuration shows the MAIN ZONE connections to a multi-channel amplifier. You may
use single ended RCA audio cables or the preferred balanced XLR audio connections. The
advantage of the XLR balanced connections is that they have a much higher rejection to any
radiated noise from AC line cord interference. Also note the connection of the 12 VDC trigger
to turn the amplifier on.
In this configuration the DMC-1 is connected to 5 channels of amplification via balanced XLR
connections. The sixth output would connect to the input of a powered subwoofer. If using
more than one subwoofer, use the pass through output on one subwoofer to route the input
signal to the additional subwoofer(s). If you choose to connect the remaining two connections
(LEFT and RIGHT SURROUND BACK) you will need a 7 channel amplifier like the one
shown here - the Emotiva MPS-1 - and you must enable the channels through the SPEAKER
SIZE menu of the DMC-1 remote control.
This connector will
plug into the input of
a powered subwoofer
1
1
1
2
By connecting the 12 VDC
trigger, the amplifier will turn
on whenever the DMC-1’s
MAIN ZONE is selected
2