Emotiva airmotiv +, Руководство пользователя

Страница: 30 / 36

Page 28
AIRMOTIV SPEAKERS
Mounting the Airmotiv A2+
The Airmotiv A2+ may be mounted on either a wall or ceiling using the included Easy-Secure
mounting bracket. When mounted on a wall the Airmotiv A2+ will usually be mounted above
head height, near the ceiling, with the front of the speaker angled downwards toward the listener,
and the tweeter towards the bottom. When mounted on the ceiling the A2+ should usually be
angled toward the main listening location. Speakers on the left and right side of the listening
position should be located and angled symmetrically if possible.
To mount the Airmotiv A2+ the Easy-Secure mounting bracket should be securely attached
to a sufficiently strong wall or ceiling location. The combined weight of the Airmotiv A2+ and
mounting bracket is approximately ten pounds. The customer is responsible for selecting and
securing appropriate mounting hardware for their particular location.
In order to install the Airmotiv A2+ in the mounting bracket once the bracket has been firmly
attached:
• First engage the MOUNTING PINS in the SNAP INSERTS on the top of the speaker.
(The top of the speaker is the end nearest the mid-woofer.)
• Then swing the other end of the speaker into position and insert the included SCREWS
through the mounting bracket and into the THREADED INSERTS in the bottom of the speaker.
(The bottom of the speaker is the end nearest the tweeter.)
NOTE: BE SURE TO ORIENT THE AIRMOTIV A2+ SPEAKER PROPERLY RELATIVE TO THE
MOUNTING BRACKET. If you force the mounting pins into the threaded inserts intended for
the screws they may jam and cause damage to the mounting pins or the inserts.
SNAP INSERT FOR
MOUNTING PIN
THREADED
INSERT FOR
MOUNTING
SCREW
3/16”
DIAMETER
MOUNTING
HOLES
MOUNTING
SCREW
(included.)
SPEAKER
BRACKET
4-11/16”
6-5/8” (bracket)
7-1/8” (speaker)
7-7/8”
GRILL
12-5/8”