Emos P5660SH, Руководство пользователя

Страница: 10 / 102

10
• The device must only be connected to and used with 230 V AC
(~)/50 Hz electrical wiring fitted with a protective contact in line
with valid electrical regulations.
• Pay attention to the data on the type plate of the appliances
connected to the device. Maximum input power of all connected
electrical appliances must not exceed 3,680 W (max. current 16
A). Max. inductive load: 4 A.
• Any use of the device not listed in the previous sections of the
manual will result in damage to the product and could present
danger in the form of a short circuit, injury by electric current,
etc. The device must not be modified or otherwise restructured!
Safety warnings must be followed unconditionally.
• Make sure that the lead-in earth pin is not damaged – a damaged
earth pin could endanger the life of the user.
• The recommended operating temperature is from 0 °C to +55 °C.
• The device must not be used in hostile environments such as
environments with flammable gases, vapours or dust.
• Never tamper with the electrical circuits of the device or
disassemble it! If the device is damaged or non-functional,
contact the seller.
• Only clean the device and the LCD screen using a soft dry cloth.
Do not use any cleaning agents or immerse the device in water!
• The device is not intended for use by children or persons whose
physical, sensory or mental disability or lack of experience and
expertise prevents safe use, unless they are supervised by a
person responsible for their safety. Keep the device out of reach
of children. Children must be supervised to ensure they do not
play with the device.
Do not dispose with domestic waste. Use special collection
points for sorted waste. Contact local authorities for informa-
tion about collection points. If the electronic devices would be
disposed on landfill, dangerous substances may reach groundwater
and subsequently food chain, where it could affect human health.
DE | Steckdosenthermostat und Zeitschaltuhr
Diese digitale Steckdose kombiniert eine Schaltsteckdose zum
zeitgesteuerten Schalten von Haushaltsgeräten und eine tempera-
turgesteuerte Steckdose (Thermostat) zur automatischen Regelung
von elektrischen Heiz- und Kühlsystemen
(Heizstrahler, Heizlüfter, Handtuchwärmer, Infrarot-Heizungen,
Klimaanlagen).
Technische Spezifikation
Stromversorgung: 230 V~, 50 Hz, 16 A max.
IP Schutzart: IP30
Arbeitstemperatur: 0 °C bis 55 °C
Intervall für das Einstellen der Zeit: 1 Minute
Schaltlast: max. 230 V AC, 3 680 W; 16 A für Widerstandsbelastung;
4 A für Induktionsbelastung
Temperaturmessung: 0 °C bis 45 °C, mit Auflösung 0,1 °C
Genauigkeit ±1 °C bei 20 °C
Temperatureinstellung: 5 °C bis 40 °C in 0,5 °C Schritten