Emos M0502, Руководство пользователя, Страница: 5 / 64

5
2. Measure the second distance; the result will be displayed along with icon.
(If you want to repeat the measurement of the second distance, press C/OFF.
The result will be erased and you can proceed again from step 2.)
3. Measure the third distance; the result will be displayed, along with total
volume in m³ and the icon.
If you wish to add up/subtract the total results, press the button after each total volume result is
displayed and repeat measurement in line with steps 1, 2 and 3.
Erase all values on the screen by pressing the C/OFF button.
Indirect Measurement (Pythagoras)
You can calculate distance between two points which are difficult to measure (obstacles, scaffolding,
reflective surfaces) by applying Pythagoras‘ theorem.
Note:
Correct result is guaranteed only if the two measured distances are at a right angle (90°).
• Both measurements must be made from the same point.
• Always measure the longer distance first.
1. Turn on the device and 3× short press the button.
2. The screen will display a flashing section of the icon.
3. Measure the first distance and the result will be displayed on the screen.
4. Measure the second distance. Both results will be displayed in the top portion of the lines. The bottom
line will display the calculated third distance.
Measurement Memory/Erasing Memory
The device automatically records 20 (0 to 19) last measured values.
Note:
Next measurement will overwrite the oldest measurement in the memory.
Long press the button; the icon and measurement number will be displayed.
Now repeatedly press the button; this will display the results of individual measurements and the
type of measurement.
Repeatedly press the C/OFF button when in the mode showing measurement memory.
Each button press will erase the latest measurement.