4
Setting Group Timer
• Select a group and click on the group name at the centre of the device. You will enter
the MENU for timer settings by clicking on Add Timer Setting. Set your timer and confirm
by pressing Done. To delete the group, click the Delete Group Settings button.
Setting a Combination of Commands for Turning One or Multiple
Sockets On/Off
• After pressing the Device Combinations button, you can set various combinations of
turning on or off one or even multiple sockets. All the processes can be activated by
pressing the Go button next to the button showing the group name.
Alarm Feature
• The application and device can send a warning message to your e-mail or to the
application mailbox. You can enter and modify the message by pressing the Add
Alarm Message button. When needed, if you hold the Power button for 3 seconds on
the G-Homa timer socket, the socket will send the set message to the e-mail or the
application mailbox. You can set the message destination in the Push Notifications,
OPERATING MANUAL FOR APPLICATION-CONTROLLED WI-FI SOCKET EMOS G-HOMA EMW302WF
choose I-O in the APP field (mailbox application) or the e-mail field. You will find all
messages sent in the Message and Alarm field. The list will also show the time and date
of when the message was sent.
Changing the Password
• If you need to change your password, click Change Password in settings and enter the
original password, then the new password, and finally again confirm the new password.
OFFLINE
• If the application shows OFF LINE on the right instead of OFF/ON and the LED indicator on
the socket is flashing slowly (ca 1× a second) that means the socket is searching for Wi-Fi
connection and the device cannot be controlled remotely. Check the Wi-Fi connection
and when needed, set up the socket again using the procedure for adding a new device.
SETTING OPTIONS – SYSTEM SETTINGS
Private Settings
• account info – displays the registered e-mail and account name, which can be changed
• account password change – allows the changing of the password for the account
Device Settings
• message and alarm – displays messages received in the device application
• new device (socket) registration – allows the adding of a new G-Homa socket
System Settings
• action interval – allows the setting of an interval from 0 to 60 seconds
• settings for the destination for alarm messages
• option for sending comments or questions to the manufacturer
• option for updating the software
• manufacturer information
• log out; after logging out, you will be asked for your login information
Timer Reset
• Press and hold the manual on/off button on the timer for 20 seconds. All settings will
be erased and the socket will switch to „add new device“ mode; the LED indicator will
be flashing rapidly.
LED Indicator – Options
• LED flashes slowly ca 1× a second – the socket is searching for Wi-Fi connection. Press
and hold the button below the LED indicator until the LED begins flashing several
times a second and the socket switches into connection mode. Once there, follow the
instructions for adding a new device.
• LED flashes quickly several times a second – the socket is in connection mode, follow
the instructions for adding a new device. After successfully completing the settings,
the LED will remain on in the ON mode and off in the OFF mode.
GB
