11
WEATHER FORECAST
The device contains sensitive pressure sensor built-in with sophisticated and proven software that predicts
weather for the next 12 ~ 24 hours within a 30 to 50 km (19-31 miles) radius.
Sunny/Clear
Slightly Cloudy
Cloudy
Rainy
Rainy/Stormy
Snowy
Note:
- The accuracy of a general pressure-based weather forecast is about 70% to 75%.
- The weather forecast is meant for the next 12 hours, it may not necessarily reflect the current situation
- The weather icon will flash on display when the rainstorm comes
- The
SNOWY
weather forecast is not based on the atmospheric pressure, but based on the outdoor
temperature. When the outdoor temperature is below -3°C (26°F), the
SNOWY
weather indicator will be
displayed on the LCD.
BAROMETRIC/ATMOSPHERIC PRESSURE
TO SELECT THE DISPLAY MODE
Press and hold the
[ BARO ]
key for 2 seconds to toggle between:
-
ABSOLUTE
the absolute atmospheric pressure of your location
-
RELATIVE
the relative atmospheric pressure based on the sea
TO SET RELATIVE ATMOSPHERIC PRESSURE VALUE
1. Press and hold the
[ BARO ]
key for 2 seconds until
ABSOLUTE
or
RELATIVE
icon flashes
2. Press
[
]
key /
[
]
key to switch to
RELATIVE
mode.
3. Press the
[ BARO ]
key once again until the
RELATIVE
atmospheric pressure digit flashes
4. Press
[
]
key /
[
]
key to change the value.
5. Press the
[ BARO ]
key to save and exit the setting mode.
Note:
- The default relative atmospheric pressure value is 1013 hPa (29.91 inHg), which refers to the average
atmospheric pressure.
- When you change the relative atmospheric pressure value, the weather indicators will change along with it.
- The relative atmospheric pressure is based on the sea level, but it will change with the absolute atmospheric
pressure changes after operating the clock for 1 hour.
TO SELECT THE MEASUREMENT UNIT FOR THE BAROMETER
1. Press the
[ BARO ]
key to enter unit setting mode.
2. Use the
[ BARO ]
key to change the unit between
inHg / mmHg / hPa
.
3. Press the
[ BARO ]
key to confirm
RAINFALL
TO SELECT THE RAINFALL DISPLAY MODE
The device displays how many mm/inches of rain are accumulated in an hour time period, based on current
rainfall rate. Press the
[ RAINFALL ]
key to toggle between:
-
RATE
Current rainfall rate in past an hour
-
DAILY
The DAILY display indicate the total rainfall from midnight
-
WEEKLY
The WEEKLY display indicate the total rainfall from the current week
-
MONTHLY
The MONTHLY display indicate the total rainfall from the current calendar month
Rainfall rate
Daily rainfall
Weekly rainfall
Monthly rainfall