6
STOP THE PROGRAM
1. Turn the dial to OFF to stop watering program.
2. Turn the dial back to ON to resume your programmed watering schedule.
Care and Maintenance
The product is designed to provide trouble-free service for many years if used appropriately. Some
advice for proper operation:
• Read the manual carefully before using this product.
• Do not place the product in locations prone to vibration and shocks – these may cause damage.
• Do not place any open flame sources on the product, e.g. a lit candle, etc.
• Do not place the product to places with inadequate air flow.
• Do not tamper with the internal electric circuits of the product – doing so may damage the
product, which will automatically void the warranty. The product should only be repaired by a
qualified professional.
• When expecting freezing temperatures, timer should be removed from the hose faucet and stored
indoors to avoid potential freeze damage.
• Filter traps dirt particles, prolonging life of timer. Clean filter regularly and replace if worn.
• To clean the product, use a slightly moistened soft cloth. Do not use solvents or cleaning agents
- they could scratch the plastic parts and cause corrosion of the electric circuits.
• Do not immerse the product in water or other liquids.
• In the event of damage or defect of the product, do not perform any repairs by yourself. Have it
repaired where you purchased the product.
• This device is not intended for use by persons (including children) whose physical, sensory or
mental disability or lack of experience and expertise prevents them from safe use of the device,
if they are not supervised or if they have not been instructed regarding the use of this appliance
by a person responsible for their safety. It is necessary to supervise children to ensure they do
not play with the device.
Do not dispose with domestic waste. Use special collection points for sorted waste. Contact
local authorities for information about collection points. If the electronic devices would be
disposed on landfill, dangerous substances may reach groundwater and subsequently food
chain, where it could affect human health.
DE | Digitale Zeitschaltuhr Pro
Spezifikationen
Min/Max Betätigungsdruck
0.5 bar – 8 bar (10 psi - 100 psi)
Arbeitstemperatur
3 °C–50 °C (37 °F–122 °F)
Wasserdicht
IP 54
Bewässerungstage
Montag bis Sonntag, oder alle 2 bis 6 Tage
Bewässerungszeiten
Von 1 min bis 3 Stunden 59 Minuten
Stromversorgung
2× 1.5 V AA Batterie
Batteriefunktionszeit
ungefähr 1 Jahr
Betriebsspannung
2.3 V to 3.3 V
Ventilabschaltung Arbeitsspannung
≤ 2.6 V
Ruhestrom
≤ 30 µA
Содержание Digital Tap Timer Pro
Страница 3: ...2 1 2 3 1 2 3 4 5 6 7 2 1 4 3 ...
Страница 76: ...23 ...