4
The chime will switch to self-learning pairing mode which lasts for
30 seconds.
During this time, press the ring button. The chime will ring and the button
is now paired with the chime.
This automatically ends self-learning mode.
5. To pair multiple buttons, repeat the process for each button from step 1.
Note: The chime has an internal memory where it stores the codes of the
currently paired buttons for the event of a power failure. There is thus no need
to pair buttons again after a power cut.
Wiping the Memory of Paired Buttons
Press and hold the volume button on the chime.
Plug the chime into a socket.
The LED of the chime will light up after ca. 5 seconds. Release the button.
The LED will turn off.
The memory of all paired buttons will be erased.
Selecting a Ringtone
1. Repeatedly press the ringtone change button located on the chime.
2. Each press of the button will play a different ringtone. The last ringtone
played is the one that will be used.
Setting Different Ringtones when Paired with Multiple Buttons
If you use 2 or more buttons, you can set a different ringtone for each paired
button to better identify which button was pressed to ring the chime.
1. Plug the chime unit into a 230 V AC/50 Hz socket.
2. Then, long-press the volume button on the chime for ca. 5 seconds.
3. The chime LED will light up; release the button.
4. The chime will switch to self-learning pairing mode which lasts for 30
seconds.
5. During this time, repeatedly press the ringtone change button ; the
ringtone that plays last is the one set. Then press the ring button; the
chime will ring and the button is now paired with the chime.
6. This automatically ends self-learning mode.
Repeat the process from step 2 for every button.
If you later want to change the ringtone of already paired buttons, it is first
necessary to wipe the memory of paired buttons.
Setting the Bell Volume
1. Repeatedly press the button on the chime.
2. Each press will set a different volume level in the following order: 100 %
– 75 % – 50 % – 25 %.
Installing the Doorbell Button (Transmitter)
1. Begin by pairing the button with the chime.
2. Before installation, check that the pair works reliably in the chosen spot.
Содержание 3402123000
