ZONA Operating Instructions
5
Manual Override
Manual Override allows you to set a temperature (higher or lower) than the current room temperature by interrupting the current
programme. This new temperature will be maintained until the Manual Override is turned off.
From the main display, briefly press either
or
, the Manual symbol
will appear and the temperature can then be changed to
the desired temperature.
Press
to confirm your selection.
To cancel Manual Override press
. The Manual Override will be removed, press
to return to the main display.
The ZONA will resume the previously set programme.
Locking and Unlocking your ZONA
Locking the ZONA disables all the functions of the buttons and shows the small padlock symbol in the top right of the display.
Hold
&
together for 3 seconds. The padlock symbol will appear, indicating that the ZONA has been locked.
Repeat these steps to unlock the ZONA.
Advanced Settings List
1.
Boost Setting -
Hours and Target Temperature 5-35°C
2.
Holiday Setting -
Days and Target Temperature 5-35°C
3.
Sensor Type -
00 Inner Sensor, 01 External Sensor,
02 Inner & External Sensor, Default 00
4.
High Temperature Protection -
35-90°C, Default 90°C
5.
Low Temperature Protection (Frost Protection) -
0-10°C, Default 5°C
6.
Swing -
1-9°C, Default 1°C
7.
Temperature Calibration ADJ -
±9°C, Default 0°C
8.
Highest Target Temperature -
35-90°C, Default 35°C
9.
Lowest Target Temperature -
0-30°C, Default 5°C
10.
Home Mode -
Temperature Setting 5-25°C, Default 22°C
11.
Away Mode -
Temperature Setting 5-25°C, Default 15°C
12.
Sleep Mode -
Temperature Setting 5-25°C, Default 18°C
13.
Restart Thermostat / Reset Thermostat -
a.
Screen shows ‘
’
b.
Press
or
and the screen will change to ‘
’
c.
Wait 10 seconds or press
button to confirm setting
Advanced Settings
From here you can access the Advanced Settings for your ZONA. These settings will allow you to personalise the way your ZONA works.
To access the Advanced Setting Menu:
Hold
&
together for 3 seconds.
Use
to switch between the Advanced Settings. Use
&
to make changes to the chosen Advanced Setting.
Once you have finished altering the Advanced Settings, press
to confirm changes and return to the main display.
