emmegi GIOCAMPER M7 T-Sat, Инструкция по эксплуатации и гарантия

Страница: 5 / 16

5
BACK SIDE OF CAMPER
FRONT SIDE OF CAMPER

Positioning of User Consolle:
User Consolle is designed to be placed in an hole in the wood furniture. If you do not want do any
holes you have to purchase the plastic box (Optional).

Choose the best point to place the user consolle.

If you chose to make the hole please take a note of these measures:

Height 6.5 cm c.a.

Lenght 11.8 cm c.a.

Verify that the User Consolle match the hole size, if not perfect please adjust the hole with a
wood rasp.

If you choose to use the plastic box (Optional), make an hole in the box to insert the
cables(According cables position).
WARNING: During the installation of user
consolle, in the wood or in the plastic box,
pay attention to the FLAT cable and power
cable on the back side of the consolle.
Any damage or breaking of these cables will
NOT BE COVERED FROM WARRANTIE.

Positioning of cables:

Choose a point where you want to
install the antenna on the roof.
Chose the entry point of the cables (for example a fairlead or kitchen hood).
Use a protective tube to avoid the exposure of cables and fix it on the roof.

Pass the cables from outside to the inner side of the camper (power and SAT cables).

Place the SAT cable untill the digital SAT receiver.

Place the Power Supply cable untill the point you will place the user consolle.
We suggest to make electrical connection near the user consoll place.

Place the user consolle cable near the point you will make the electrical connection.

Where electrical connection will be made you must have a positive and negative 12Vcc
cable coming from the living cell electrical plant. We suggest to use cable with a section of
at least 1.5 squared/mm.
We suggest, if possible, to use a dedicated line coming directly from battery.