emmegi GIOCAMPER M7 T-Sat, Инструкция по эксплуатации и гарантия

Страница: 11 / 16

11

MENU SET FUSO ORARIO
1. Fuso Orario If clock is installed (Optional), set local timetable.

MENU INFO
1. Numero telefonico Show Assistance phone number.
assistenza

MENU SALVASCHERMO
1. Modello antenna Show antenna model.
2. Volt batteria Show voltage of battery.
3. Time: Data e ora Show time and date if clock is installed.

If clock is installed, the voice “SET OROLOGIO” will be shown, here you can change time
and date.

With vertical arrows will change numbers.

With orizontal arrows will change parameter.

In the user consolle there is a “Ghost Menu” (MENU DATI). This menu give the way to
change parameters of the antenna such as
satellite’s frequencies , language and
others…
This menu is password protected and according the password insterted give the way to
change a little selection of data.
You cannot access to this menu by yourself but you will be instructed to use it by phone
assistance to guide you step by step with modifications.
Modify data without know what you are doing can cause the failure of good working
system. Please, if you want to continue to watch TV without stress yourself, never
modify anything without contact us.
ANOMALIE

Anomalies and solutions:

Known anomalies and relative solutions are listed below:
1. ERRORE COMUNICAZIONE

With user consolle turned ON remove power for 30 seconds. Then
connect again the system to the power supply and press ON to reset.

With antenna in OPEN position start the camper engine to force an
automatic closure and a reset of the system.

If problem is still present please contact post sales service of EMMEGI
Electronics refering to the Pag. 14.
2. SFORZO ALZO PARABOLA – SFORZO ROTAZIONE PARABOLA

Verify that no obstacles are locking the movement of antenna.

With user consolle turned ON remove power for 30 seconds. Then
connect again the system to the power supply and press ON to reset.

With antenna in OPEN position start the camper engine to force an
automatic closure and a reset of the system.

With antenna in OPEN position proceed to remove sat dish, by untighten
the 2 bolt of 13mm, in order to travel in safe.

If problem is still present please contact post sales service of EMMEGI
Electronics refering to the Pag. 14.