2
3
1
4
24
Manual City Jet & City Bassinet v. 1.1
Assembly of seat unit
• Fix the cable with the aid of the press studs on the seat fabrics.
• Please make sure that the zips are attached, in total 5 pcs.
2pcs under the seat, 1 by the footrest, 1 on each side of the black
plastic caps.
• Finish by assembling the hood.
WARNING!
• Before you use the pushchair again, please make sure that the seat
fabrics are properly attached and that the zips are zipped correctly
.
Assembly of Hood
• Press the two plastic legs, one on each side of the hood, into the
two plastic holders on the seat frame, one on each side.
Make sure they snap into place.
WARNING!
•
The hood should always be fitted on the pram when it is being used.
This section applies to the following products:
City Jet
Removal and assembly of the seat fabrics
• The pushchair fabrics is assembled when delivered, but it can be
removed for washing.
• Before washing, remove the seat plate in wood which is found
underneath the seat fabrics, open with the help of the zip.
IMPORTANT
• Follow the washing instructions in this instruction manual under
care and maintenance.
• Open all zips of the seat fabrics. Put the seat plate into place. Place
the seatunit aluminium frame as shown on the picture.
• The black plastic band should be placed on the outside.