
6
7
8
9
7
8
9
10
10
5
Manual Cerox 2.0 v. 2.5
28
WARNING
Make sure children are clear of any moving parts if you adjust the
stroller, otherwise they may be injured.
To reverse the handle
• If you would like to change the seat direction easily you can reverse
the handle.
• Move the handle to its upright position. Release the mecanism
by grabbing the Newton hook and pull the black plastic part up
towards you (7) with both hands. Once it has released, push the
handle carefully over to the other side of the vehicle (8). After that
the handle can be locked into position on the other side.
• Check that it clicks into position on the other side and that the New-
ton hook has engaged properly.
• Note! Be careful when moving the handle over so that you do not
damage the surface of the chassis.
• Adjust the handle in the position required.
IMpORTANT
• Make sure that the area is clear. Remember the child’s active safety
is your responsibility!
Assembly and usage of the chassis
• Your pram is equipped with a Newton safety catch (6). The
safety catch is an extra safety detail that prevents involuntary
reversal of the handle.
using the footmuff (accessory)
• If you use a footmuff (accessory) you must use the rear press stud
(10) on the armrest fabric, i.e. the press stud that is closest to the
hood.
•
The tray
is already fitted on delivery but it can be removed for
washing. Remove the wooden plate before washing.
IMpORTANT
• It is important that the tray straps are properly affixed over the axle.
They should not be attached to the cross pipe.
WARNING
Make sure children are clear of any moving parts if you adjust the
stroller, otherwise they may be injured.
Folding the pram
• Start by making sur
e that the handle is on the same side as the
safety catches (9) and that the pram is braked.
• Release the safety catches (9) by pulling these gently towards you.
• Press down the safety catch and fold the handle forward.
• If you need to make more space you can remove the wheels by
pressing in the hub cap’s release mechanism and pulling the wheel
off the axle.
• Wipe off any dirt or grease from the axles before you replace the
wheels.