4
3. Changing And Saving Parameters Values
Enter password with cursor
(Right, Left,
)
.
Up and Down
buttons
Press the Up or Down
buttons to select the main
parameter group you wish
to view/change.
Parameter can be changed
with Up and Down buttons.
Press Enter button to
access to all parameters in
currently parameter page.
GENERATOR
V12:
380V
V1:
220V
V23:
380V
V2:
220V
V31:
380V
V3:
220V
On load
ü
ü
Operation Screen
Press the Up or
Down buttons to
select the section
you wish to
view/change.
Press the
Enter
button.
Press the Enter button to confirm
password. If the password is
incorrect, the unit will drop out of
program mode.
Note1:
If Enter button is pressed
and the technician password is
zero, Password screen will be
ignored.
Press Enter button to access to
all parameters page in current
main parameter group.
Press Enter button
to confirm the changed
value.
Program
Language
Event Log
PROGRAM
Operator setting
Technician setting
Factory adjustment
TECHNICIAN SETTING
Password
0162
TECHNICIAN SETTING
Password
0000
TECHNICIAN SETTING
System
Generator
Engine
Inputs
TECHNICIAN SETTING
System
Generator
Engine
Inputs
GENERATOR
Volt level
Frequency level
Current level & act.
Power level
GENERATOR VOLT LEVEL
Under volt shutdown
320 Vac
GENERATOR VOLT LEVEL
volt reset
Over volt shutdown
Under volt shutdown
Under volt prealarm
Under
Press the Enter
button to view
parameter value.
GENERATOR VOLT LEVEL
Under volt shutdown
325 Vac
GENERATOR VOLT LEVEL
volt reset
Over volt shutdown
Under volt shutdown
Under volt prealarm
Under
Operation
Screen
To exit from
programming mode any
time, press Stop/Reset
button for 2 seconds.
ü
PROGRAM
Operator setting
Technician setting
Factory adjustment
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
GENERATOR
V12:
380V
V1:
220V
V23:
380V
V2:
220V
V31:
380V
V3:
220V
On load
Press Enter button to
access the menu options.
Press Enter button to
access the wished
menu item.
GENERATOR
Volt level
Frequency level
Current level & act.
Power level
When the Stop/Reset button
is pressed any time, previous
page can be accessed.