Introduction Brochure. ENG TRANS-MIDIAUTO 01 V10 10/20
TRANS-MIDIAUTO
AUTOMATIC START UNIT
1.2 Warranty
EMKO Elektronik warrants that the equipment delivered is free from defects in material and workmanship.
This warranty is provided for a period of two years. The warranty period starts from the delivery date. This
warranty is in force if duty and responsibilities which are determined in warranty document and instruction
manual performs by the customer completely.
1.3 Maintenance
Repairs should only be performed by trained and specialized personnel. Cut power to the device before
accessing internal parts.
Do not clean the case with hydrocarbon-based solvents (Petrol, Trichlorethylene etc.). Use of these
solvents can reduce the mechanical reliability of the device. Use a cloth dampened in ethyl alcohol or
water to clean the external plastic case.
1. Introduction
1.1 General Specifications
The unit provides automatic start and stop the engine and protect the generator system. Both
automatic and manual control is possible. A test mode is also available which allows the generator to
be run for checking the generator system.
The unit monitors J1939 ECU messages and provides remote start/stop control via J1939 protocol
(supported ECUs: Volvo EMS2, Volvo EDC4, Perkins, Scania S6 and standard messages).
The unit monitors generator operation and gives warning of any faults that are detected.
The configurable input-3 can be used as the water level sensing input.
The unit calculates engine RPM from Magnetic Pickup sensor input (Trans-MidiAUTO.MPU devices
only) and/or generator voltage signal. At Trans-MidiAUTO.CAN devices, unit gets engine RPM
information from J1939 ECU.