30
6.6. Technician Pages Parameters Definetions
ALARM TYPE
Alarm type for selected channel is can be adjusted according to this parameter. If parameter value,
1 = Low Alarm
2 = High Alarm
3 = Band Alarm is selected.
PRE. A. TYPE
Pre-Alarm type for selected channel is can be adjusted according to this parameter. If parameter value,
1 = Low Alarm
2 = High Alarm
3 = Band Alarm is selected.
HYSTERESIS
Hysteresis parameter value for Alarm and Pre-Alarm is can be adjusted by this parameter.
BAND ALARM
Bandwith for Band alarm is can be adjusted by this parameter value.
SENSOR ALARM
Sensor break alarm for selected channel is can be disable or enable by this parameter. If parameter value,
0 = Sensor break alarm disable
1 = Sensor break alarm enable
6.6.1. Page-1 Parameters
Technician Parameter
Page Number
Min
Max
Default
Unit
ALARM TYPE
Alarm Type For Channel-X
3
1
2
PRE. A. TYPE
Pre-Alarm Type For Channel-X
3
1
2
Parameter
Explanation
HYSTERESIS
Hysteresis Value For Channel-X
400.0
-400.0
1.0
BAND ALARM
Bandwith Value For Channel-X
SENSOR ALARM
Sensor Alarm Ena./Dis Selection For Channel-X
1
0
1
PV. OFFSET
Process Offset Value For Channel-X
0
O
C
O
C
O
C
-
-
-400.0
400.0
10.0
-50.0
50.0
PV. OFFSET
Process offset value for selected channel is can be adjusted by this parameter.
Analog Channel
Number
Channel Selection
Buttons
Channel number is can be seen upper left side of the display and can be selected by pressing
the channel selection buttons.
i
If no operation is performed for 20 seconds in technician parameters section, device turns to
main operation screen automatically.
i
ENA/DIS