Using your BodyBare epilator
• Before using your BodyBare epilator for the first time, we
recommend that you familiarise yourself with how the appliance
feels on the skin. Try the unit on the back of the hand before
using it on delicate areas such as the face.
• We recommend that you have a warm shower or bath before use
and use a loofah or exfoliating cream to prepare the skin.
• Ensure that the skin is clean and dry. Do not use over body lotions
or moisturisers.
• Attach the adaptor to the unit, plug in, remove the protective cover
and switch on.
• This epilator has a massaging finger which stimulates the skin,
making the epilation process as gentle as possible.
• There are two settings. Use setting I on fine hair and setting II on
thicker or coarser hair.
• The safety switch lock in the middle of the switch button needs to
be pressed in to slide the switch to the desired setting.
• The epilator head attachment and the shaver head attachment
can only be attached to or detached from the main unit while the
switch button is at the “0” setting.
• When removing hair it is very important to hold the skin very taut
to avoid pinching.
• If hair is longer than 5mm, trim with scissors before use.
• The appliance is not suitable for use on the eyebrows.
• Hold at a 90 degree angle to the area you wish to remove hair
from with the BodyBare logo facing away from you.
• Move the appliance in rapid circles, lightly gliding over the skin.
There is no need to apply pressure.
• If too much pressure is applied, the appliance may slow down
• The appliance is designed to be used on hair as short as 0.5mm
so there is no need for stubble to appear before epilating.
