12
Save Memory
Save Memory
Save Memory
Save Memory
The Save Memory function saves the current Frequency, Polarity (13V/18V), Band (22kHz
signal state), and LNB Type in the selected location. The knob can be turned to select
the desired memory position to change. If a new name is needed for the memory
position, then it can be entered on the next screen when the menu button is pressed to
select the memory position number.
If the memory location name is already correct, then press the menu button again to save
the frequency data in this memory position. If the name needs to be changed, use the
knob to make the changes. Characters can be added by selecting the character with the
knob and then pressing the menu button. Characters can be deleted by selecting the
“Delete” function with the knob and then pressing the menu button. “Clear” will erase
the name, and “Cancel” will abort saving the memory position.
