4
|
ENGLISH
3.0 Manually configure as wireless router
Install the GigaLINK 300N as a wireless router if you have a cable modem or ADSL
modem with a router function. Make sure that your Internet browser and your network
are correctly configured when configuring the wireless router manually. You can
assume that the settings are correct, unless you have changed any of the settings in
the past.
Example of GigaLINK 300N as wireless router
3.1 Connecting the GigaLINK 300N
1.
Turn off your computer.
2.
Connect the GigaLINK 300N to a wall outlet using the supplied power adapter.
3.
Connect the supplied UTP network cable to the ‘WAN’ port of the GigaLINK
300N.
4.
Connect the other end of the UTP network cable to the ‘LAN’ port of your cable
modem.
5.
Connect a UTP network cable to one of the four ‘LAN’ ports of your GigaLINK
300N.
6.
Connect the other end of the UTP network cable to the network adapter in your
computer.
Do I have a proper network connection? Turn on the computer and verify if the LED on
the GigaLINK 300N, corresponding with the LAN-port to which you connected the UTP
networking cable, is lit. The LED on the network adapter of your computer should also
be lit.