14
|
ENGLISH
12. Click ‘Apply’ at the right side in the menu ‘DHCP Server’.
13. Type ‘192.168.8.200’ in the ‘LAN IP address’ field.
14. Type ‘255.255.255.0’ in the ‘Subnet mask’ field.
15. Click the button ‘Apply & Restart’.
Note! If you wish to log in to your GigaLINK 300N at a later point in time, you must
assign a fixed IP address to your computer.
1.
Click ‘Start’.
2.
Click ‘Control Panel’.
3.
Double click ‘Network Connections’.
4.
Right click the appropriate ’LAN Connection’.
5.
Click ‘Properties’.
6.
Select ‘Internet-protocol (TCP/IP)’.
7.
Click ‘Properties’.
8.
Select ‘Use the following IP Address’.
9.
Enter ‘192.168.8.25’ in the ‘IP Address’ field.
10. Enter ‘255.255.255.0’ in the ‘Subnet mask’ field.
11. Click ‘OK’.
12. Enter ‘http://192.168.8.200’ in the address bar to log in to the GigaLINK 300N.
5.3 Securing your GigaLINK 300N signal booster (2)
(WPA2 AES)
If you use the GigaLINK 300N as a signal booster with another GigaLINK 300N,
WPA2 AES security is supported. If you use another type of wireless router, WEP
security is recommended.
To avoid having uninvited guests probing your wireless network we strongly
recommend securing your wireless network.
1.
Click ‘Wireless Wizard’.
2.
The wizard appears in a pop-up screen. Click ‘Next’.
3.
Choose you country/region and click ‘Next’.
4.
Fill in the desired name for your wireless network in the field ‘SSID’. (Use the
‘Check SSID’ option to ensure this name is not already in use.)
5.
Click ‘Next’.
6.
The GigaLINK 300N will automatically scan for a suitable wireless channel.
7.
As a choice, the most suitable wireless channel will appear on your screen.
8.
Click ‘Next’ to confirm this channel. (You can pick a wireless channel yourself if
you want). Write down the chosen channel***.
9.
You will see a brief summary with the settings you have made so far. Click ‘Next’
to continue.
10. Choose ‘WPA2PSK’ and click ‘Next’.
11. Choose ‘AES’ and click ‘Next’.