19
|
ENGLISH
6.2.Configuring the local wireless network on the signal
booster
Before setting the Eminent router for Wireless Multi Bridge usage, you need to have
the following at hand:
•
The network name of the first wireless router (SSID)
•
The security key of the first wireless router
•
The channel of the first wireless router
Preferably, setting up the Wireless Multi Bridge connection is done using a wired
connection between the wireless Eminent router and the computer.
1.
Turn on your computer.
2.
Open your internet browser (e.g. Internet Explorer or Firefox).
3.
Type ‘http://192.168.8.1’ in the address bar.
4.
Press the ‘Enter key’ or click ‘Go to’.
5.
Click 'Setup Tool'.
6.
You will now be asked for a ‘Username’ and a ‘Password’. Fill out ‘admin’ in the
‘Username’ field and ‘admin’ in the ‘Password’ field and press the enter key.
7.
Click 'Advanced Setup'.
8.
Click 'Wireless'.
9.
Click 'Wireless Setup'.
10.
Fill out a SSID: If you want your current wireless network to be extended using
the same network name (SSID), you need to fill out the SSID as used on your
first wireless router. Also, the channel needs to be the same.
11.
Set a security at 'Encryption' and ‘Encryption key’. If you want your current
wireless network to be extended using the same network name (SSID), you can
set the same security as used on your first wireless router.
12.
Click 'Apply' to save the settings.
13.
Then click 'Save' at the top of the screen.
