14
|
ENGLISH
Note: WDS is not a standard protocol and may not work between different brands and
models. If you are facing problems please refer to the chapter “Configure the router as
a signal booster (Wireless Multi Bridge).
A 2
nd
EM4510 as signal repeater
5.1 Connecting the signal booster (2)
1.
Turn off your computer.
2.
Connect the router to a wall outlet using the supplied power adapter.
3.
Connect the supplied UTP network cable to the ‘LAN 1’ port of the router.
4.
Connect the other end of the UTP network cable to the network adapter of your
computer.
Is my router correctly connected to the wall outlet? You can check this by verifying that
the POWER LED is on.
(1)
(2)
